Endress+Hauser flowmeter replacement requests should start with the exact order code, serial number and process data. Product names such as Promag, Promass and Prowirl describe different measuring principles and instrument families, so the replacement path should be checked before price comparison.
Common flowmeter families in RFQs
| Family | Typical RFQ context | Details to confirm |
|---|---|---|
| Promag | Electromagnetic flowmeter requests, often for conductive liquids and water or wastewater style applications. | Line size, liner, electrodes, transmitter version, approvals and process connection. |
| Promass | Coriolis flowmeter requests where mass flow, density or high accuracy may be part of the discussion. | Sensor size, tube material, pressure rating, medium and transmitter configuration. |
| Prowirl | Vortex flowmeter requests for steam, gas or liquid applications. | Medium, temperature, pressure, flange, output, hazardous-area and loop-power requirements. |
Replacement information to collect
- Full order code and serial number from the instrument nameplate.
- Tag number, pipe size, process connection and installation photos.
- Medium, flow range, pressure, temperature and required accuracy.
- Power supply, outputs, communication protocol and display requirements.
- Required documents such as datasheet, manual, calibration record or certificates.
Same model, configured model or alternative
A same-model quote is usually the simplest path when the full order code is available. A configured replacement may be needed if the old code is obsolete or incomplete. A functional alternative should be reviewed more carefully because process conditions, outputs, installation length and approvals may change.
Related JSSS Nova pages
For brand support, review Endress+Hauser flow and process instrumentation. For category sourcing, see Flow Measurement. For a specific document-style request, see the E+H Proline Promag W 400 datasheet resource or submit details through the RFQ page.
Source notes
Technical wording was checked against official Endress+Hauser pages for Promag W 400, Promass F 300 and Prowirl F 200. Final replacement selection should follow the current order code, datasheet and process conditions.
FAQ
Is the product name enough for a quote?
No. Names such as Promag or Promass are only the starting point. The order code and serial number are much more useful.
Can an old Endress+Hauser flowmeter be replaced by a newer version?
It may be possible, but dimensions, outputs, approvals and process conditions must be checked before treating it as equivalent.
What photos are useful?
Nameplate, transmitter, sensor body, process connection and installation photos are all useful for replacement review.
Can Shengshi help request a datasheet?
Yes. Send the order code, tag number or nameplate photo, and Shengshi can help review the document and sourcing request.